Introductions
The Stereo HI-FI RCA RL Audio Balun Extender Over Cat5e 1000 meter Passive allows one Analog Stereo Hi-Fi R/L Audio to be transmitted Via Cat5/5e/6 Cable up to 3250ft( 1000m )in a point - to - point connection .it is built in surge suppressor to protect Audio equipment against damaging voltage spikes . its integrated ground loop isolation prevents annoying "hum-bars" common noise with long distance installations.The product is designed for audio applicationswhere full-range ,hi-fidelity audio frequency response is required.Used in pairs, the Stereo Hi-Fi Audio Balun eliminates costly and bulky coaxial cable,allowing audio equipment to be connected or moved within a structured cabling environment.Mainly applicated for Boardroom systems, classroom training, Auditoriums, custom home installations and intercom systems.
Specifications
1 Channel Stereo Audio up to 3250ft(1000m) Via Cat5/5e/6
20 Hz to 20 KHz bandwidth
Full ground-loop immunity in Audio
Built in TVS for surge protection
Audio Inputs support line level unbalanced Audio
Quicker moves, adds, and change
Setup Guide
Plug the Left(White) and Right(Red) Stereo Audio RCA Connectors of the transmission Balun into the HI-FI Audio output of the source component , plug the Left(White) and Right(Red)RCA connectors from the Receive Balun into your desired input component. Insert the CAT5 cable into both ends of the Baluns. You may use standard EIA 568A/B Termination.
Specifications:
3dB Bandwidth; 20 Hz to 20 KHz over the distance range
Maximum Input: 1.1Vp-p
Insertion Loss per balun pair: Less than 2 dB over the frequency range.
Common Mode Rejection: Greater than 60 dB @ 1KHz
Greater than 40 dB over the frequency and distance range
THD: Maximum 0.007% @ 1 KHz over distance range
Audio Source Impedance: 100 ohms maximum
Audio Receiver Impedance: 10 k ohms minimum
Max. Distance – Cat5e/6 UTP : 3250ft (1,000m)
Pin Configuration (RJ45) EIA 568 A or B: Audio 1 (White): pins 1[R] & 2 [T] Audio 2 (Red): pins 7 [R] & 8 [T]
Cable – UTP : 24AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/foot.Attenuation: 6.6 dB/1000 ft at 1 MHz
Connectors: Two RCA-F connectors for audio:white red RJ45 for twisted pair
Temperature: Operating: 0° to 55°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing
Dimensions(packaging): 155*80*30mm(including one pair of Balun)
Weight(packaging): 300g
Package Contents:
1pc RCA Balun Sender
1pc RCA Balun Receiver
1pc Operation Manual |
|
